|
What should I know before using hydraulic lifts? |
Only people properly trained in the use of hydraulic lifts and the positioning vehicles on lifts should use hydraulic lifts.
Customers and other unauthorized people should not be in the work area.
Make sure that "dead stick" type controls return to the neutral or "off" position when released.
Ensure that the hydraulic pressure does not exceed the recommended level.
Use lift only for the job for which it was designed.
Inspect and service controls and equipment regularly according to manufacturer's instructions.
Check packing nuts and surface bolts around cylinders on hydraulic hoists as recommended in manufacturer's manual.
Inspect pistons for dirt, damage or other abnormal conditions regularly.
Lubricate the hoist and check for the tightness of fasteners.
Check the hydraulic fluid level at least every second month.
Check for bent arms, cracks in welds or damage or wear.
Replace damaged parts with those recommended by lift manufacturer.
Only properly trained lift service personnel should repair hydraulic lifts.
Use lift adaptors designed for contact on the lifts.
Ensure that the lift area is clean and free of oil, tools, equipment, hoses, wires, etc. before a car or truck is driven into the work area.
Make sure that the weight of the vehicle does not exceed the lift capacity of the hydraulic lift.
Know how to find the centre of gravity of the vehicle and where to position the vehicle on the lift.
Check the vehicle's lifting points vehicle recommended by the manufacturer to examine for rust, damage or oil.
|
General Hydraulic Info 